Strobe Light Beacon

Strobe light - beacon
These 12-16J strobes are built with the toughest environments in mind; from the rugged die-cast aluminium base to the conformal coated circuit board. No tools are needed to change the flash tube or remove the threaded o-ring sealed lens.
4261 Model: Double 80FPM 12J 12-24V
4262 Model: Double ⁄ Quad 80FPM 12⁄16J 12-48V
Dimensions: B: 6.4" H: 6.2" [161x156mm]
Lens: Twist On⁄Off
Base: Al D⁄CastCircuit: Conformal Coated

Strobe light - beacon
Strobe: medium profile, 12-48 VDC, 7 or 10 joules, double or quad flashMedium Profile StrobeAmber, Blue, Clear & RedFlush mounted without removing lensField replaceable flash tube (no tools required)Integral flange, internal and 1" pipe mountingDesigned for mounting in areas where a compact profile is requiredSeven support points provide a shock-resistant mounting of the power supplyThree wire leads allow user to choose double flash or quad flashUV stabilized polycarbonate thread-on lens allows user to change the flash tube without toolsVoltage spike and surge protected

Strobe light - beacon
12 - 110 volt DC
1.5J economy strobe features a linear flash tube with a twist on lens with sealed o-ring for easy flash tube replacement; A rugged ABS base for vibration resistance and a fully encapsulated circuit board. Dimensions: B 5.1" H 3.8" [129x95mm]Lens: Twist On⁄OffBase: ABSCircuit Board: EncapsulatedVoltage: 12-110V


Strobe light - beacon double flash

12 - 24 VDC

High Profile strobe beacon

• Fully enclosed base: Sturdy polycarbonate base or cast aluminum base, all strobe power supplies are encased within the base itself for added protection against moisture and vibration. • Silicone coated power supplies: For added protection against the elements, all strobe power supplies are double dipped in a uniquely formulated silicone mixture before being secured into the base enclosure. • External flange mount, internal "secure" mount, or pipe mount all in one: All 2000 Series strobe beacons come standard with a base that allows you to either: (1): 3 knock out holes for permanent "secure mount", (2): a sturdy built-in flange to externally mount beacon (except on cast base model) (3): a built-in 1" pre-threaded pipe mount. • Older style strobe beacons have been rendered obsolete as there is no longer a need for external hooks, base plates or inconvenient and expensive pipe adapter kits. • New optic, interchangeable domes: All 2000 series strobe beacons are now equipped with the newest state-of-the-art single lens optics to optimize their light output. • All beacons utilize the same low and high domes for ease of interchangeability. • All six safety colors are available: amber, clear, blue, red, green and purple. • Easy access for modular parts replacement: After removing two screws from the outer dome, you are able to easily access either the flashtube or the strobe power supply without removing the beacon from your roof. • Warranty: All Whelen "Value" 2000 Series strobe products offer a 3 year (from date of manufacture) or 2 year (from date of purchase) warranty on all strobe power supplies, and a 6 month warranty on all flashtubes.

Strobe Light beacon 4 flash

• SAE Classification: SAE Class 1 Strobe Beacon (amber & clear only) • SAE Class 2 Strobe Beacon (red, blue & green) • Input power: 22 watts, output power: 15 watts; 13 joules • High/Low Intensity Feature: Manual Hi/Low operation is standard. • An automatic Photocell Hi/Low feature is standard on 2015AP & 2015AC models only Flash rate: "Flash-4" feature. All patterns standard in all beacons • QuintFlash: 72 FPM (default pattern) • Double Flash: 115 FPM • Modu-Flash: 150 / 370 / 150 variable FPM • Action Flash: A unique combination of Quint & Single Flash (To make a choice from the QuintFlash factory default pattern, simply cut the specified jumper on the strobe power supply) • Amperage Draw: 1.7 amps/12 volt; .85 amps/24 volt • Base Material: polycarbonate or cast aluminum